Installation =============== Installing the driver -------------------------- Read the installation instructions in the adapter manual carefully. Follow these instructions to install the adapter in your computer. 1. Start Windows NT4 (x86). 2. Click START / SETTINGS / CONTROL PANEL / NETWORK. 3. Select ADAPTERS. 4. Click ADD. 5. Select HAVE DISK. 6. Depending on the type of installation medium used (e.g. CD-ROM, floppy diskette, network drive, etc.) enter the path to the required files. 7. Click OK. 8. Select the Marvell Yukon Ethernet Controller entry that matches your adapter. 9. Click OK. 10. Select the appropriate configuration (see section "Driver Options" in this readme file for details). NOTE: We strongly recommend to install the latest Windows NT4 (x86) Service Pack *after* successful installation of the driver. 11. Click OK. 12. Restart your system. PS. Support CD Lan Driver Path:\Drivers\Lan\Marvell\WINNT\ The files are gedialog.dll,gedialog.hlp,oemsetup.inf,yukonwnt.sys,yukonwnt.htm and yukonwnt.txt. If the amont of files,is less than six, they might be hid in system folder.